Author Archives for John
- Clear protective film features 8 mil polyurethane film with clear coat finish that is virtually invisible when applied.
- Easily removable and protects scratching from normal wear and tear.
- Protects the door cups, door edges, door sils, and trunk ledge
Do not wash your car with the use of any chemicals for 14 days from the coating application.
Do not use automatic touch car washes. Hand washing is recommended.
Do not let contaminants like bird droppings remain on any surface. You should remove them as soon as possible.
Do not expose to acid, caustic chemicals, and any other contaminants that you are aware of.
Follow the You Drive = You Care principal. Each Car is subject to a unique life. The harsher the life, the more maintenance it requires.
If any damage occurs, Contact your Blackout Tinting, do not try to fix it on your own.
Always wash your car once it is cool and out of direct sunlight, never when the car is hot.
Ideally a vehicle should be washed every 2 weeks or 1,000 miles, whichever comes first.
Use good maintenance detail products like Americana SOAP, Ceramic Pro Care Maintenance
About Paint Protection Film
Paint protection film is designed to protect your vehicle’s paint from paint chip, scratches and swirl marks. It is applied to the exterior of your vehicle paint. It has a 10 year warranty from yellowing, cracking, blistering and delamination. There is no warranty if the film or protected panel gets damaged in an accident or from debris.
Drying Time
Your new paint protection film will take 3-4 weeks to fully cure depending on weather conditions. Do not wash your vehicle for 5 days. Vehicles should be returned for inspection within 2-4 weeks.
Condition of Vehicle for Paint Protection Film Installation
Vehicle cannot have any paint protection coatings on it such as ceramic coatings. These can affect the effectiveness of the adhesion and may cause lifting, bubbles and other issues. Client is aware that the design of the PPF is for OEM factory paint. The client waives and
WAIVER
THANK YOU FOR CHOOSING BLACKOUT TINTING!
We would like you to have some background knowledge on auto glass tinting prior to having tint installed. Although we use one of the best material films on the market, and do quality workmanship, there are some factors to deal with: DUST, SPLICING, DOT MATRIX, REAR DEFROSTERS Dust is all around us and is next to impossible to keep out of the air. This also makes it impossible to keep out of the film. We however take every precaution to do so: we are not responsible for any dust that may show up. Large glass, such as rear windows, might need to be spliced. This means the film must be cut to accommodate the curvature of the glass. This splice can sometimes be seen. It’s a lot nicer when the back glass has defogger lines so the film can be spliced on the
What service are you dropping your vehicle off for?
Window Tint
Paint Protection Film
Ceramic Coating
GET A QUOTE
- AUTOMOTIVE TINT
- PAINT CORRECTION
- CERAMIC COATING
- PAINT PROTECTION FILM
